Thursday, October 13, 2011

How to Paint a Door

Well, I promised a how-to on painting doors, and I’m here tonight to tell you lucky ducks how it’s done. Hold on to your seats, this is probably the MOST exciting post you will ever read.

Evah!!!

I showed you my front door transformation here:

brick red front door

I also painted the inside of that front door months ago, and I showed you that project here. I’ve painted a few doors in my day, and there’s a few things I’ve learned along the way. Hopefully this post will help you if you decide to do the same!

OK, so the first thing you’ll want to do is test to see if your current paint is oil-based or latex paint. I’m not sure about interior doors, but I’d be willing to bet most exterior doors are oil-based. The thing is, you can paint oil over oil and latex over latex, but not latex over oil.

Got it? ;)

But, I don’t do oil-based paint. I just don’t – latex is SO much easier to work with. Oil takes longer to dry – and that was the kicker. I didn’t want to take the door off the hinges and I knew I’d need to shut it (at least a few times) during the process. Oil-based would make that harder to do.

Not to slam oil paint though -- it is probably best for an outdoor surface. It holds up great! But I wanted to stick with my latex, so I needed to do a couple steps first. To make sure the door was painted in oil, like I thought, I used denatured alcohol:

testing for oil-based paint

You’ll just need a bit – rub some on the door with a rag, and if the paint comes off, it’s latex. If it doesn’t, it’s oil-based paint. I knew once I tested it that ours was the latter.

Because of that, I needed to prime with shellac-based primer:

painting over oil-based paint

I use BIN for just about everything now – it is VERY thin and it goes on easily because of that. It’s stinky – so make sure to ventilate the area you’re working in.

I love it because it dries CRAZY fast – so it is perfect for a door. And an impatient do-it-yourselfer. ;)

When it comes to doors, I have a plan of attack that works for me – it cuts down on brush marks:

how to paint a door

(source for door pic)

This is my method – I have no idea if this is the right method. ;) I start with the areas around the panels by using a good angled paint brush:

Purdy paint brushes

The folks at Purdy sent me a set to use and I was in heaven. ;) I used the 1.5 inch angled brush for the little insets in the door:

Purdy brushes are the best – hands down. And I’m not saying that cause I got a set. ;) I love them and use them all the time!

The BIN primer is so thin, you don’t have to worry too much about brush strokes:

bin shellac primer on door

I didn’t take the hardware off to paint the back of the door – I just taped around it and it worked out pretty well. I wish I would have taken if off, but that’s a whole other post. ;)

I finished up the door with the primer and let it dry:

priming front door

I use a small roller for the raised panels and the area around them. (Steps 2, 3 and 4 on the pic above.)

I started the same process again with my black paint. I use Black Suede from Behr for all of my black paint projects and LOVE it:

My friend Kate has mentioned to use Floetrol to cut down on brush strokes:

floetrol

I used it about half way through, and it was weird -- I didn’t notice a difference at all:

 

(One side had it, one didn’t – I’m pretty sure the left didn’t and the right did.)

I added the exact amount it called for, but it didn’t help much, as far as I can tell. I will try it again though. It sounds like it (usually) helps tone down brush strokes quite a bit!

Even with the tinted primer (I have my BIN tinted a tad), it still took a total of THREE coats to get it completely covered:

black interior doors

But it was SO worth it. So worth it, in fact, that I am going to try out a few more black doors inside. ;)

When I did the front of the door, I made sure to clean it really well before starting:

I just used my cleaning wipes, and then wiped it down with a damp towel after that.

I also took off the hardware between coats:

I left them off as long as possible after each coat, but you’ll see later why I had to keep putting them back on. ;) I believe I took that hardware off about 15 times. Gah.

I used the same process with the primer as the inside, and if there were any brush marks, I just knocked them down a bit with some sanding between coats:

        

Then…my lesson in reds started. ;)

I don’t know what lesson I learned, other than the one I already knew. Get a sample of your paint! Paint it on a poster board, then hang it on your front door.

SAVE YOURSELF people!!

;)

I started with a random match to a red that had the word “brick” in it – and it was not brick. It was more of a corally orange. I never knew what coral-orange was before, but this is it:

The photos don’t do it justice. It looked like the entrance to a seafood restaurant. :)

Because I got the paint at my local True Value, I got it mixed in an exterior Porter paint. And because I had a Porter paint nearby during this debacle, I went to them to see if they could adjust it:

I found a Porter color that was more what I was thinking. The Porter guy was SO helpful and spent a good 20 minutes adding to it, (for FREE!), and he got it to the “new” red – a color called Brick Dust.

Well. Brick Dust was more like Pink Sunset Dust:

It was at this point that I was about to give up and live with a pink front door. ;)

These were just first coats, so they would have darkened and deepened with more coats – but I just knew they weren’t right.

So I gave it one more try – this time I started from scratch. I checked out the Martha Stewart colors from Home Depot and found The One – Chocolate Cosmos:

image

Finally! The brick red I was after from the start!

I normally use small sponge rollers to paint doors and furniture:

foam roller

But for some reason the Behr paint I used for the exterior side (I had the Martha Stewart mixed in exterior Behr) was SUPER thick. I don’t know if it was because it was exterior or what, but it was acting all wonky.

I ended up doing a final coat in a mini version of a regular 3/8 inch nap roller:

That size works great for the panels on the door, and the thicker nap covered much better. I’ll be using that again for the future doors.

So…there you go. The most exhilarating post yet. I bet you are totally JAZZED right now to paint some doors! Really, it’s not a hard project at all – it just takes some time and patience.

Two things to remember – figure out if you’re dealing with oil or latex-based paint (that you are painting over), and get a sample of your color – mainly for an exterior door. The color on the swatch in the store will look different in your house and will look even more different outside.

Believe me. :)

So have you painted your front door? Did you get the color right the first time? Any fun front door colors out there? Do tell!

74 comments:

  1. Your door looks great, Sarah. But then I'm a sucker for a red door. My old house was white with black shutters and a Talbot's-red front door. I loved it. When we lived in Michigan, our front door was what I call "Charleston Green"--a deep, deep green that's almost black. Our local hardware store sold Ben Moore paints, and they were so helpful. We had a dark green mixed, but it was much too light when we actually got it on the door outside in God's natural light. So we kept going back, and they kept adding black--for free! Paint people must be really patient folks!

    ReplyDelete
  2. I didn't know how to test to see if you were working with oil vs latex so I definitely learned something new. Something I desperately needed to know before embarking on the same venture. Thanks for sharing Sarah! Have a marvelous weekend!

    ReplyDelete
  3. What an adventure! I love how it looks now. I've been wanting to repaint my front door for years now (literally years), but I can't bear the whole "hardware on, hardware off" situation, so I keep putting it off!

    Looks fab!

    ~Angela~

    ReplyDelete
  4. I'm so excited to read this! I'm planning on painting our front door black tulip, I think it's called... Its dark, dark purple really. I've been waiting for direction from my husband, but I'm not waiting anymore!!

    ReplyDelete
  5. Great tips. I've been anxious to start my front door painting project so this was a perfect post. I'm going Legacy from Behr, it's a dusty purple. My house is mint green and I want to paint the house so bad, but that cost $$$ so I figured I might as well play with it while I have it and do something unexpected. Purple front doors means prosperity and honor live within. ;)

    ReplyDelete
  6. We recently took out our duct taped sliding glass door and replaced it with a wall and a door with blinds between the glass. We wanted something fun for the door since it is in the back and not very many people will see it besides us. We chose Georgian Leather in Valspar Antirust Armor paint from Lowes. It looks like University of Texas orange, and we adore it!!! See it here: http://leaveittodavis.blogspot.com/2011/09/our-door-before-paint.html

    Your door looks beautiful!! Of course, everything you do does and you inspire us all!

    ReplyDelete
  7. Oh, and one more thing....we loved the color of our door so much, we decided to paint our metal patio chairs and tables the same color. We are not quite finished, but it is going to look GREAT!

    ReplyDelete
  8. Love your door, and the perspective of your photo! It looks so pretty with your decor and plants.

    I'm going to do my door soon - shiny black oil-based inside and out! Mine is red now - it has been red for 8 years and I love red doors, but wanted a little change. It's red inside and out now, and I've enjoyed it, but again, change is fun!

    -Revi

    ReplyDelete
  9. I love the color you settled on for the door...it's not your typical bright red...looks great! We have a purple front door...Behr's "Blackberry Harvest". I love it!

    Oh, and thanks for sharing the tip about how to test for oil or latex paint...learn something new every day, right?!

    ReplyDelete
  10. Thanks for the tutorial! I've painted my front door twice (from navy to red, and then red to black) and both times I have ended up with some brush marks! I'll have to try your method out!

    ReplyDelete
  11. Hi, I painted my front door red. Surprisingly it was a can of miss-tint paint! It worked great, and was actually left over from the wall I painted in my craft room. I was a painting-my-front-door-virgin so I didn't do anything you just posted about (which I have now repented of and will do next time) and I just started painting! I cleaned it off of course but that is about it. It worked well and I liked it. Funny story though...soon after I painted said front door my parents came to visit and my mom kept making comments over the weekend about red front doors and how she thought it was crazy that anyone would choose to paint their front door red. At the end of the weekend she asked if I chose to and I proudly said yes! haha

    ReplyDelete
  12. Love the tute! I also purchased/added a floetrol to some paint and didn't see a difference. Then someone that knows his stuff told me not to go by the amounts on the container - to keep adding it until the paint is the right consistency. Wow, what a difference that made. The paint went on so much easier and it definitely got rid of the brush strokes. He also said the painters told him to use the small foam rollers to eliminate brush strokes on doors.

    ReplyDelete
  13. Glad you told me about the oil-based paint. I have no idea if my front door is painted in latex or oil, now I can check before I paint and that's exactly what I plan to do next week! Thanks.

    ReplyDelete
  14. I'm about to embark on my own front door. Unfortunately due to HOA rules we can only pick from about 5 colors and our door can not be the same color as the neighbors. GAH! I'm so sick of brown, I picked Cranberry.
    Anyway...I was not even sure where to begin as I've never painted a door before. Thanks for the info...and wish me luck!

    ReplyDelete
  15. sure could have used this post a month ago...oh well, the paint is on my door and hasn't fallen off yet. ;-)
    Reds can be hard. I sent my husband to the H.D. for
    a barn red. Gave him the sample and off he went with our 7 year old son. He came back with a pepto bismal
    color paint (seriously!) and said that the guy said it would darken.... I looked at him, he looked at me, crickets chirped and my son said " I know Mom, I tried to tell him." ;-) I then handled getting the paint from that point on!

    ReplyDelete
  16. Thanks for the tutorial. Our front door is on our project list.

    ~Mrs. Delightful
    ourdelightfulhome.blogspot.com

    ReplyDelete
  17. I painted our front door... except I didn't strip any of the old paint off... MISTAKE! Now that I have come across this tute I am going to attack my door with a vengeance when the weather isn't so warm... yes, warm, TX stays hot until November :( My color is a sagey green to complement the trees and the limestone of the house... I love Red, but not brave enough to do it...

    Thanks for the Tute!!

    ReplyDelete
  18. Slam dunk on the final door color! I guess you had to kiss a few frogs?? ;) Your front porch area looks so, so pretty, Sarah!

    ReplyDelete
  19. We have a red front door, too. And you are right--it's hard to find the right color! At first ours was hot pink--I am sure the neighbors were scared. But the perfect color we found was Benjamin Moore Classic Burgundy. It is not burgundy AT ALL, though. So I don't know why that is the name. It's the perfect deep red classic door color. :-)

    ReplyDelete
  20. This is timely... I'm getting ready to paint my front door. I'm gonna be bold and try a pear green color. If that doesn't work... I'll cover it up with black. LOL

    Thanks for all the great tips.

    ReplyDelete
  21. I just painted my front door black with the new gel based door paint and had a lot of trouble - been wanting to paint it for 8 years, but like you, I need to sand all the new paint down and start over. I love the black, but I'm going back to latex paint! Might even go find me some Behr Black Suede... :-)

    ReplyDelete
  22. You inspired me to paint my first door back when you did your black garage door. I think it was the first "blog project" I ever attempted :) I still, to this day, am not completely happy with my talent but after this tutorial I might give that door another whirl. I love the black, think it really was a great idea for our garage. . .it just always looks dirty. Ugh. A week or so ago I did paint our front door. . .I went into it "blind". . .my daughter suggested a color (I was so tired of white!) and I went with it. . .the one I had on hand didn't look too great after the first coat so I went to the store and bought a quart that we matched. I didn't know and bought a flat finish. . .I'm sorry I did but am not going to spend another $14.25 on an eggshell. This time it turned out GREAT (maybe because it's a lighter color?) and I didn't use rollers but just a brush (I agree with you on the Purdy!). Brush marks don't bother me too much and I don't notice them. Maybe I'll ask others and go over it one more time with a roller if others comment. Do you think a protective coating of some kind should be added? I'm do "dumb" in this dept. . .ever since you inspired me all those years ago, though, I do tend to just jump in now, realizing most mistakes can be fixed :)

    ReplyDelete
  23. Great tips. That black has such a nice presence in your foyer. It makes a whole new statement.

    I just painted our outside door which has a window panel. I tried to skip the taping by sliding paper behind those plastic panes. Big mistake, they stuck to the paint and all. Kind of messy.

    Glad you took this on. Some people don't paint things like doors but it makes such a difference :-)

    ReplyDelete
  24. thanks for the test tutorial - very helpful! I'm trying to find a front door red hubs and I can agree on, but I know from past experience painting purple and red walls and such that it was always a disaster without a really good tinted primer first.

    ReplyDelete
  25. Sarah,

    I love your front door - so fresh and pretty. MMM's front door is screaming for paint. It's a beautiful door with lots of detail, and it's plain. white. boring. Thanks for the tips and tricks. I'm sure I'll be using them!

    ReplyDelete
  26. Your door looks great, just shows that persistence pays off. My mom recently painted her front door in bright red, which looks great with her white hours with black shutter. It makes such a statement. Sarah!
    www.budgetfriendlydecorating.com

    ReplyDelete
  27. Great job inside and out.

    I would LOVE a red front door but our HOA won't allow it - such a bummer.

    ReplyDelete
  28. Thanks for this post! I've been kicking around the idea of painting my door. We had the house painted 2 years ago and it's beige but your red might be more fun!

    Thanks also for the info on Floetrol--I painted a china cabinet this week and it did not go well. :( Brush marks everywhere! I considered getting some Floetrol and now I wish I had. I HATE brushmarks and the little bubble marks left by foam rollers. I'm going to try the regular nap roller next time and invest in some Floetrol.

    ReplyDelete
  29. We recently painted our front door red. It seemed to bright at first but with 2 coats, it dried darker and I'm happy with it now. Didn't have to use a roller, just a brush. Our door has a wood-grain finish to it so the paint formed to the door's cracks. Looks good. Check it out: http://decoratingcents.blogspot.com/2011/09/red-front-door.html.

    ReplyDelete
  30. I am completely obsessed with your blog!! I love it! When my blog grows up, it wants to be just like your blog! Keep writing! You've given me all sorts of inspiration for my home!

    ReplyDelete
  31. Thanks for the great tip on telling the difference between latex & oil paint! When we built our house with HFH (and the 3 next door), the head of painting (who did that as a job for real) taught us to paint just like your drawing. That way our doors look like solid built wood doors because of the direction of the paint strokes!

    ReplyDelete
  32. We just installed a new fiber glass front door it was primed white and we painted the inside white and the outside a deep green i did 3 coats with Behr latex exterior and its only been a couple of months but i've already noticed it chipping in some places (the white priming showing through). Obviously I'm going to need to touch up those spots. Any advice?

    ReplyDelete
  33. I've been dying to paint my front door inside and out!
    I'm waiting till the weather cools. I'm in Texas it's still in the 90's!

    xo

    ReplyDelete
  34. I rarely post comments on your blog but I do follow it religiously. I painted my door over the summer, barn door red! Great color. Now, what I need help with is the sidelights. I already stripped them, now what? LOL
    Jackie
    Galexicupcakes & Sweets

    ReplyDelete
  35. Thanks so much for the info, Sarah!! Your door looks great. I used Floetrol on my last furniture project and found I had to use much more of the product than the instructions indicated I should use. I can't tell you how much because I wasn't measuring, just pouring (definitely more than twice the indicated amount). I painted a wooden dresser black suede (love the color) and found that the Floetrol decreased the gloss in the paint; however, my last three coats were Minwax satin polyurethane, so it all turned out to have the perfect glossiness. I will continue to use the Floetrol from here on out. Hope that helps.

    ReplyDelete
  36. I've been dying to paint my front door red, you've given me the inspiration I need! I'll let you know how it turns out!
    Have a wonderful weekend,
    ~Brooke

    ReplyDelete
  37. OMG! We just went thru this in our family room! We had a 4x5" ish size sample o n the wall for a week, decided it was perfect and shelled out the cash for SW paint. It was supposed to be a burnt orange. Instead? BRIGHT red-orange. Seriously much more red than orange. And this discovered after 4 hours of trimming around and behind the stone fireplace.

    So we went back to SW and got a sample can of a much more orangey orange (but still a little muted). Painted the wall on one side of the fireplace and loved it! We were ready to go buy the gallon when hubby says "what about Christmas?" Well, I'm one of those crazies that loves my Christmas stuff, and will leave it up until March. It was totally not working for Christmas. I brought some stuff up to check, and nope.

    Back to SW. 5 more sample cans. Posterbaord painted and up. After a few days we chose a dark blue, and painted over the orange sample (that side of the wall now has 3 coats of paint in one week). Left it blue for a couple of days and decided we loved it in all lights, all times of day, etc.

    Back to SW. We decided to go with Satin because the sample can was labelled satin. Shelled out the money for a second gallon. Did I mention this is for one stink' wall? Not even a whole room. Paint the wall with the new satin blue, dan it's SHINY!!! I could tell after trimming, but figured that the paint wasn't dry yet, so hence the shiny-ness against the paint on the wall. But nope. It dried shiny.

    Back to SW. I explained to the girl who says "Well you can't go by the sample paint." Ummm, then why label it satin???!! She ended up taking pity on me and selling me a quart (since I already had one coat of blue on the wall) at the sale price that we'd gotten the gallon at.

    So I paint. I used a small 6" roller since the surface to the sides of the windows are smaller than a regular roller. We got Purdy's instead of the cheapies I normally get. It left streaks. Well, we did paint over a shinier sheen, so maybe it's just showing thru? I did lightly sand between coats btw since it was going over a shinier paint. Coat #2 of the new blue. Still roller marks. Not enough paint to go over it with a regular roller. GUH!

    Back to SW. Luckily they had another sale going, so I got another quart. Used a regular roller, and it looks great (for the most part anyway, not like it had looked at least).

    So the stinkin; wall is done and is beautiful. Cost a fortune to get there, but I guess that's just the way it goes sometimes!

    I'm glad you found your color in the end too :)

    ReplyDelete
  38. I'm sorry to hear that you had to go through so many colors to get the red you want. I took a gamble on my blue front door project and found it to be much easier than that. And I love the results! Great tips too by the way, thanks for sharing!

    ReplyDelete
  39. Thanks so much for this tutorial - it does seem like some time and patience are needed for a door painting project, but it actually doesn't sound too difficult.

    I still haven't decided if hubby and I should paint our currently green front door or not. I love red much better, but the existing green isn't too bad... and no one else seems to have it (we've got a couple red doors in the neighborhood already).

    I'm also loving the interior of the door painted black - but I am SOOOOO nervous to give this a try!

    Argh, dilemmas dilemmas.. to paint or not to paint?!

    Take care,
    Christina
    designingbynumbers.blogspot.com

    ReplyDelete
  40. Awesome! We just managed to paint the exterior of our front door but my husband sprayed it. That leaves me to do the inside (yep, black). Did you use satin or flat? Our satin (what we used on the outside) seems sort of too shiny but I wonder if it's not because it's an oil based laquer paint?

    Thanks!!

    ReplyDelete
  41. could you share what grit sandpaper you used in between coats? I never know what grit is appropriate to use.

    ReplyDelete
  42. I am DIY-ing to paint my front door! It all cracked and peeling and U.G.L.Y! You know it's bad when your neighbor re-does his and gives you his leftover stain and sealer....hmmm...

    ReplyDelete
  43. Yes I have! (Have to read a bit down the post to see it. )
    http://www.borninazoo.com/2011/07/july-in-a-nutshell/
    The color is Benjamin Moore premixed Classic Burgundy. It's being discontinued ... BOO!

    Then... I decided to paint my garage to match the new siding. So, naturally, the garage door was painted a similar color to the front door.
    http://www.borninazoo.com/2011/10/this-is-something-that-is-going-to-make-me-very-happy/
    I didn't use the BM paint for the garage because I wanted to save what was left from the quart for touchups. I had it color matched at a big box store & the quart was 1/2 the price. I don't use the garage that often, so it didn't matter to me if I went with cheaper paint on it.

    An awesome tip I learned on a DIY blog was to have an extra label of your paint mixture printed out & adhere it to the stick that you used to stir the paint with. Works awesome for either computerized color matching or having another can mixed up of the same brand.

    ReplyDelete
  44. Your post could not have come at a better time. I have been debating painting our front door since we moved in, but never felt confident in what process to follow. We have been struggling to decide on the right color but I'm thinking black shutters and a black, golden yellow, or blue door. This is what it currently looks like: http://www.diynewbies.com/tour-our-house/exterior/
    What color combo would you suggest?

    Your black doors inside have also been lingering in my mind. We have a similar window/door layout as in your dinning area. Again, I have just not been able to take the plunge... but this post may have just pushed me in the right direction.
    Thank you for your inspiration.

    ReplyDelete
  45. Hi Sarah...you are one talented lady..the door "how to" is wonderful..as a newbie it's beyond helpful to fall in love with a look then find out you also provide the step by step instruction...BRILLIANT...I will be back again..I am excited to find you..
    blessings Karena "A Loblolly Life"

    ReplyDelete
  46. If there is anything I know about painting with red it is to use a grey primer underneath! After painting my kitchen red (not using grey primer) and it taking like eleventy billion coats, I painted another red project in just 2 coats using grey primer. Life saver!

    Kris

    ReplyDelete
  47. We repainted our front door this summer. I just don't think there's any easy way to paint a door.

    http://mrsjennaw.blogspot.com/2011/05/front-door-makeover.html

    ReplyDelete
  48. This comment has been removed by the author.

    ReplyDelete
  49. We are in the process- right now!- of painting our previously stained door. My husband sanded all the stain off, and primed, then painted. We waited. Waited. Still waiting for the paint to dry enough to hang it back up! I think we could get it up just fine, but I'm pretty sure that it would stick if we closed it. Absolutely no idea where we went wrong!!

    ReplyDelete
  50. Wow it looks terrific. Okay should I draw you a map to my house so you can take care of my door too. giggle. Hugs and sincere wishes for a lovely weekend xo

    ReplyDelete
  51. It looks fantastic and well worth the effort! Reds are tricky, that's for sure! The only door I ever did was black, which is pretty hard to mess up from a color perspective (thank goodness!)

    ReplyDelete
  52. Thank you for all the tips! I want to paint our front door black, which will now probably have to wait for spring since fall has been very wet here. Anyhoo...my question is this: I have a sidelight...do I paint it black too, do I paint the trim around the windows (on the door and the sidelight) black too? Our house is new, the door has never been painted and is fiberglass. Does that make a difference in the type of paint?

    I'd so appreciate any answers you can provide! Love your blog and style!

    ~blessings~
    Lisa

    ReplyDelete
  53. Great information! Never heard of the Floetrol before. I'll give it a try!

    ReplyDelete
  54. This is exactly what I needed!! "Paint front door" is last on my current to-do list, mostly because husband has been terrified to let me try as of yet. I've already forwarded your link to him, so my pretty painted front door should appear any day now! :)

    ReplyDelete
  55. Oh, I love red doors. When my first baby was born, while I was in the hospital my dad went to our house and painted our door red, because he knew I was dying to have a red door. Sweet memory. May you have many happy visitors come through that door! I'm your newest follower; anxious to figure out how to join your parties!

    ReplyDelete
  56. This door is beautiful! You are really talented! I always thought that spray painting was the way to go with doors - I will definetly be trying your method though! Thanks!!

    ReplyDelete
  57. I love the way your door turned out. Thanks for all the wonderful tips. I certainly learned a few things for when we do our doors.

    ReplyDelete
  58. Great tips! Better to save the splurge these days.

    ReplyDelete
  59. I love your gorgeous red door - it's so pretty. Works beautifully with Hallowe'en decorations, but I can hardly wait to see it done up for Christmas! I painted the exterior door of our last house a very rich shiny black and love it. But I started out wanting a very deep ox-blood red, or rich dark blue - couldn't find the right colour and ended up, in self defence really, going for the black. But I've never been sorry - it looks great. But I wish I'd had this article then. The door doesn't look bad but there are brush strokes it would be nice not to see! [being lazy, I didn't remove the hardware, just painted around it with a teeny tiny brush]

    ReplyDelete
  60. My front door is some type of metal, not wood, so it has a few rust spots. Can I use the same primer?

    ReplyDelete
  61. I couldn't let this post go without commenting on your primer. I used to be a HUGE fan of the stuff you have posted, but found a new love... its called Stix. Its sooooo great! Goes on like the BIN but is made to be an adhesive primer and stick to anything. I couldn't resist the opportunity to tell you about a great product for us DIYers. :)

    ReplyDelete
  62. I know you have a TON of comments already but you can use nail polish remover instead of denatured alcohol to test if the paint is oil or latex. ;)

    ReplyDelete
  63. I did that whole my red paint is pink before. After 3 trips I figured out to go with a more brown tones red. That worked much better!

    ReplyDelete
  64. I just finished painting my door outside as well and I think I followed the same steps. It must just be a natural way to get the best results.
    Love the color. I'm changing my inside to black as well.

    ReplyDelete
  65. Oh, how I wish I had read this before my big project... I have yet to get to the door. I went for the WHOLE HOUSE. OUTSIDE. And it's terrible! I'm so embarrassed-- if there is a "mustard green", I have it. All over my house! My poor neighbors... Now we're in the debate of weather or not finishing the trim will make it liveable, or if we need to start saving for more stupid house paint. I'm sure we'll go with the latter, and I WILL be taking your advice this time and getting a sample before I go for the whole 7 gallons! Ahh, lessons learned...

    ReplyDelete
  66. uuhhh ohhh. My local hardware store told me to use "trimming" paint for my interior doors. I have black but haven't even tried it yet, now that I see you used regular paint makes me think that I shouldn't use that paint. ANy suggestions about using trimming paint for interior doors. I also want to paint my stair rail black. have you ever done that.

    ReplyDelete
  67. I was soooo excited to finally take the plunge! I have a gray house with black shutters - Colonial Style. I originally went with your "Chocolate Cosmos" color and it was beautiful! However, because I have a storm door that creates a shadow and the fact that my door is shadowed the majority of the day from the sun as well, I decided I could go brighter. I looked at Martha Stewart's "Barn" but decided to go even redder with her "Ladybug" mixed in Behr Exterior with the primer already in it. It looks great! It so depends on how the sunlight hits your door and whether or not you have a storm door. I love it! Thanks for sharing!

    ReplyDelete
  68. I was soooo excited to finally take the plunge! I have a gray house with black shutters - Colonial Style. I originally went with your chosen color "Chocolate Cosmos" and it was beautiful. However, since I have a storm door that creates a shadow and the fact that my house is shadowed the majority of the day away from the sun, I decided I could go brighter. I looked at Martha Stewart's "Barn" but finally decided to go even brighter with "Ladybug". I had it mixed with Behr Exterior with the primer already in it and it looks great! I love it! Thanks for sharing!

    ReplyDelete
  69. Thank you so much for this. I followed it almost to a T to the point of even copying your color. At first it looked so purple in the can & on the door but after another coat, beautiful! My husband and mother were both soooooo skeptical. I kept saying "the girl on the blog post I read knows what she is doing!". Thanks

    ReplyDelete
  70. Starting my door today. Your advice is just what I needed. Couldn't decide on a color and showed my 2 year old the swatches. She pointed at a gray blue, so here goes... If it doesn't look good, we know who to blame! :) Thanx for the info.

    ReplyDelete
  71. Thanks for your how-to info. I just finished painting my front door yellow. I had a color picked out, but decided spray paint would be easier and just went with the yellow color the spray paint came in. Big mistake! Not only was spray painting more difficult than I thought, the color was way off. So now I get to repaint the whole door. Oh well, now I have your advise for doing it the 'right' way. The new color will be the color I originally wanted, Sherwin Williams Decisive Yellow. We just had the house painted a bright blue with white trim and light tan shutters. As soon as I get the right yellow it will look great!

    ReplyDelete
  72. Hmm, one tip I can give is to remove the interior door first. First of all, this makes the paint less prone to drip and run. Second, it gives you the capability to reach all sides of the door without the use of a ladder. This makes painting a lot easier and a lot faster to dry. But, if you can do it without the need of the door being removed, then you just don't need the tip. Hehe! :)

    ReplyDelete
  73. I just finished painting the interior of my front door. I had amazing results because of your tips! I had a very white, steel door to deal with. I did not sand it before painting. I used 2 coats of Benjamin Moore's Gravel Gray in a semi-gloss latex paint. The results were great! I was shocked that it covered in two coats, and I didn't even use a primer. I dont remove hardware, just taped around the deadbolt, knobs, and hinges. I only used my Purdy brush (love them too!) for the panel frames. I used a 1/2 roller with a very short nap, the ones you use for glossy paint. I couldn't be happier! Next I am tackling the front and thinking of swiping your brick color:). Thanks, and if I can suggest anything, its to use a very good quality paint for best results.

    ReplyDelete
  74. I AM totally jazzed! Just finished painting my front door and it looks FABU (if I do say so myself). Because I painted it nearly the same shade of red, I didn't need a primer and it covered in 2 coats. I actually found your blog when I googled 'how to paint a door' and now I'm "in luuuuurve" with your tips and your wit! Thank you!

    ReplyDelete

I LOVE, love, love your comments! (I read every single one.)

If you have a specific question, make sure I can answer you back by adding your email to your google/blog account! And be sure to check out the FAQs tab at the top of the site. Due to the number of emails I get, I just can't get back to everyone.

THANKS so much for reading!