Tuesday, September 17, 2013

DIY roll out drawer

Hey hey! Thanks for all the comments on my navy blue lamps. ;) Love them!

Today I’m sharing a DIY I did a loooong time ago, but I added a little finishing touch yesterday and realized that I never shared it with you all. I didn’t take pics as I did it all that time ago because I honestly wasn’t sure it would work. ;)

I think I’ll still be able to explain well enough how I put this together. My idea came from my desire to have these all over my kitchen:

container store roll out drawer

(source)

Ah yes…making those deep dark cabinets easier to use. ‘Tis a dream.

But that dream is expensive. Those up there are $45 each (for only 11 inches wide!), yowza. The organization in our kitchen island cabinets was nonexistent so I needed help -- but I didn’t want to spend that much to make them work. So I figured out my own way!

I’ve since seen some different ways to make this by making a shallow box for the stuff to sit in. I’m going to attempt something similar for the other cabinets later. But my version (using mostly what I had in the garage) works great!

I started with a set of drawer slides – you can find them at most hardware stores and they come in various lengths:

drawer slide

You’re supposed to install them on the sides of the cabinet and to the sides of a drawer, but instead I installed them on the bottom of the cabinet:

DIY roll out drawer slides

You’ll see I had to nail down some scrap mdf first because I realized right off the bat that my DIY “drawer” wouldn’t clear the lip of the cabinet unless I raised this up a bit.

I just secured the slides into the mdf using four screws – two at the front and two at the back:

diy slide out drawer

Since the drawer is pulled out now you’re seeing the bottom part of the slide here. That part is covered when the slides are pushed back.

I had a scrap piece of mdf I was planning on installing on top of the slides as my “drawer,” but I couldn’t figure out how to secure the two together. I couldn’t use screws because I couldn’t get to the bottom of everything, you know? I finally had an idea to use some heavy duty Velcro – I just stuck it to the top of each slider with the other part of the Velcro on top with the sticky side up. Then laid down my piece of mdf right on top, so the Velcro stuck to the bottom of it. Does that make sense? I hope!

Here’s what I ended up with:

IKEA pot lid holder

The Velcro connects the mdf on top to the drawer slides underneath. It also makes it so I can take it off if needed (which I did have to do once) – but that Velcro is crazy strong. It’s a struggle to get it off!

The reason I had to pull the wood board off was because the sides of it were scraping up against the screws that were used to put the island together on the sides of the cabinet. Just make sure you have plenty of clearance on each side before you install everything. 

The expandable metal rack is really a pot lid holder from IKEA, but I use them for pans here (and plates in the dining room built ins):

DIY roll out drawer organization

I didn’t want it to move around so I used some plastic holder thingamabobs to secure it to the wood.

My last addition to this project was the handle I installed yesterday. I usually just pull it out by grabbing the IKEA organizer, but this will be much easier.

My only purchase when I did this was the drawer slides – I had everything else on hand. So my version was $15 – much better than the $45 version. ;)

Mine slides easily, even with all the weight of the pans on it:

roll out drawer in cabinet

I forgot to mention – it pulls out SO far out of the cabinet: 

do-it-yourself roll out drawer

Awesome!! (Ignore my ugly pans.)

Oh and you’ll want to make sure your taller items are in front if you have that upper shelf inside the cabinet.

Well there you go – my DIY roll out drawer. :) Sometimes when you want something bad enough you figure out how to make it work! Do you have any of these amazing contraptions (bought or DIY’d)? I love them – they make it so much easier to access everything in the cabinet!

35 comments:

  1. I love this idea! Thank you for sharing.

    ReplyDelete
  2. Awesome! I'm always shocked by the price of these things. I think one that fit our cabinet was $90 at Lowe's? Crazy. This, however, is much more manageable. I imagine you could customize it pretty easily as well!

    ReplyDelete
  3. You're a genius! I just had a "duh, why didn't I think of that!?" moment. :)

    Anna
    askannamoseley.com

    ReplyDelete
  4. I would love to do this in my kitchen, but living in an apartment (obviously renting) I don't know if I could do this without damaging the interior if I were to remove when (and if) I move out. Is it easy to disassemble and use again?? You are life-saver seriously!! :)

    ReplyDelete
    Replies
    1. I don't know about her version, but the purchase ones only require 6 screw holes which you could hide with wood putty when you leave.

      Delete
  5. Wow, I was wondering if there was a way to DIY those...because yes they are just soo darned expensive! If I ever get the time I might try this myself.
    So smart!

    ReplyDelete
  6. It looks great! My aunt built a pull out shallow drawer and even a pullout garbage bin for her cabinets and she loves them. I like that you use the pot lid holder so you don't have to stack them. That's what I did in my island for cookie sheets, and not stacking things is what keeps it from getting messy again.

    ReplyDelete
  7. Excellent idea! I've got a couple of deep cabinets that I could use this on.

    ReplyDelete
  8. This is fantastic Sarah! I need these all over my kitchen!! And that pot lid holder - I need to make a trip to IKEA soon!

    ReplyDelete
  9. brilliant! I bought one years ago for one of my cabinets and even though it was $$ i never regretted it. I might try your idea in some other cabinets of mine. Thanks for sharing!

    ReplyDelete
  10. I need some of those in my kitchen! It looks so organized.

    ReplyDelete
  11. I have the same accordion organizer from Ikea and I use it for the pan covers! Great ideas Sarah!

    ReplyDelete
  12. Beautiful.....that color just pops and makes an amazing statement.

    ReplyDelete
  13. Nice organization! I might have to try that at home.

    ReplyDelete
  14. What a great idea! I'm off to my hardware store to make one today :)

    ReplyDelete
  15. We got four of these when we remodeled our kitchen. I love them more than my new granite! I put my plates and cups in a bottom cabinet so the kids wouldn't be climbing on the newly painted cabinets to get stuff. Bonus: They can unload the dishwasher now! I also love the one I got for my pans and lids. I got pull down spice racks and put two of them in an upper cabinet. They are awesome! Here are the links to mine. I can't wait to add them to more of my cabinets, but you are right - they are very expensive. Maybe I'll try your idea.
    http://www.lowes.com/pd_449579-315-FG802009BLA_0__?productId=4574194&Ntt=rubbermaid+spice+rack&pl=1&currentURL=%3FNtt%3Drubbermaid%2Bspice%2Brack&facetInfo=

    http://www.lowes.com/ProductDisplay?partNumber=101295-1214-CO-15C-2-5&langId=-1&storeId=10151&productId=1000369&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

    http://www.lowes.com/ProductDisplay?partNumber=309630-94604-58-21C-2-5&langId=-1&storeId=10151&productId=3435264&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

    ReplyDelete
    Replies
    1. here they are installed in my kitchen. http://theatmakurs.blogspot.com/2013/04/kitchen-before-and-after.html

      Delete
  16. Thanks for the great idea! I'm going to share this post with my husband and see if this will work for me in my tiny kitchen!

    Karen

    ReplyDelete
  17. Sarah!! you are in my mind somehow?!?! I have been wanting to do something like this for our desk area in our kitchen. I keep our big bulky printer in a lower cupboard so it frees up more counter space. It fits perfectly but the problem is getting to the printer to operate it and load paper since it fits perfectly ;) I have extra mdf in the garage I just need a handle and the slides...eeeeeek I can't wait to do this!!

    ReplyDelete
  18. Sarah, you're a genius! I have wanted those drawer organizers in every kitchen we've ever had, and never could justify the expense. I think I could do this, I really do. :)

    ReplyDelete
  19. Awesome sauce, my friend, pure awesome sauce. I feel in danger of losing toes every time I try to get pot or pans out of my lower cabinets; they're so disorganized! I'm filing this away in the "I'll do that when I'm not a renter" part of my brain ;)

    ReplyDelete
  20. I love those drawer slider things but yes, they are quite pricey. I never even thought to try and make my own. What a great idea! =] Our kitchen is going through a mini makeover right now and these might find their way into the project. Thank you!

    Runt
    runtspickins@yahoo.com
    www.runtspickins.wordpress.com

    ReplyDelete
  21. I like your idea! Funny that the handle was so much later-good addition!

    k, dumb question maybe...it seems like the handles on the pan would 'spin' from their weight and fall into the side of the cabinet, get caught, prevent opening and make ya have to fuss with them every time the cabinet is opened. How is this prevented? Not a problem at all?

    thanks
    Chrissy

    ReplyDelete
  22. Such a simple thing that adds so much design and makes it look really thought out! I love it!

    Slightly Skint Blog

    ReplyDelete
  23. Awesome!! I've been wanting the pull-out drawers too, but we couldn't afford them when we redid our kitchen last year. This is a great idea. Thanks so much for the tutorial!!

    ReplyDelete
  24. You are one clever and talented chick!! Wish I had your DIY skills, because I need this in two or three cabinets.

    ReplyDelete
  25. That is one great post! Thanks for sharing! So much cheaper.

    ReplyDelete
  26. I'm only commenting as "Anonymous" because I don't subscribe to any of the options. That said, I love the way you think! The way you problem solve and work things out based on what you have available is amazing. Are you related to MacGyver?
    Great post,
    Leslie

    ReplyDelete
  27. What a great idea! I have lots of wasted space in my cupboards at the back where I can't put any pans for fear of never getting them out again!

    ReplyDelete
  28. i am sorry, i am still a little confused about where the velcro comes in. i am DYING to do this to my old pantry that i CANNOT reach anything! also, could you easily add sides to that platform to make them drawers? sorry, i am not following it 100% and really want to try it!

    ReplyDelete
  29. I LOVE YOU, I have been looking for something similar to do with my cabinets and this is perfect! gonna go look for the items needed THANK YOU THANK YOU

    ReplyDelete
  30. I'm going right now to the hardware store to get supplies to do this for my craftroom! GENIUS.

    ReplyDelete
  31. I love this idea! I have been loking at the prices of those you buy at the various stores & it is CRAZY what they want so I decided to see how to do it myself - I am going to definitely do what you did - want to start with my cabinets in 2 of my bathrooms. thanks so much for sharing!!

    ReplyDelete

I LOVE, love, love your comments! (I read every single one.)

I occasionally have to turn off anonymous comments because of spam. If so, you can comment if you sign in with a WP/Google +/gmail account.

If you have a specific question, make sure I can answer you back by adding your email to your google/blog account! And be sure to check out the FAQs tab at the top of the site. Due to the number of emails I get, I just can't get back to everyone.

THANKS so much for reading!